Search results

I just went through the painful Process replacing my OMNI II PRO 2002 Vintage controller, due to failed Ethernet PHY. I purchased a USED OMNI PRO II (Flashed 4.0B), and can now successfully communicate through the GL.iNet router (@pete helped with this) with good TCP communications. I have been...

Since I have had Ethernet issues on my original HAI OMNI II PRO, I purchased a USED updated controller, with the FLASH (EAROMS) under U29 & U30. It did not come with a manual, and the only manuals I have from many years are based on the old design I purchased in 2001 (USES EPROM). Does anyone...

Greetings, I reconfigured ZONES 2-4 as "NRM" quite a while ago, with ZONE-1 dedicated to 4W Smoke Detector Loop (SMK). I connected Water Moccasin contact closure on ZONE3, and then after powering up the panel, My Smoke detector loops shows "Trouble Now". I since moved relay contact to Expansion...

It seems I have had issues with "Light Level" before. I am attempting to shut off earlier than what is timed, but maintain it at 65% during timer count down.   This is ALC control. I may misunderstand how "Lighting Level" works   I just discovered a step light was still on about 11:30 PM after...

Guess I missed this (over the years), but since HAIKU stopped working (iOS 14.5) I use SPACE & Snaplink more often.   Just noticed Snaplink Mobile and Windows version doesn't display Insecure Zones, at least from what  I can determine.   Am I missing something obvious or is this a shortcoming of...

Well, iOS 14.5 finally killed HAIKU.   Since I updated to iOS 14.4 for security reasons, I found iOS was killing my iPhone battery,  Last year I purchased iMazing to back up my HAIKU App (originally purchased for $50.00).   Last year Apple updated Signing Certificate on "Space"   Last week Apple...

Any Suggestions on where I might find this for less than $100?   After researching deeper, the GRI Water Moccasin Sensor Strip, Relay Contact, 10 Foot Mesh Water Strip Sensor really would be better for boiler room.   The GRI 2600 I ordered can be used in the Laundry Room.   Wish I would have...

In the boiler room, I had an Expansion Tank rupture, figuring it was last Monday since I was in their Sunday afternoon).  I was expecting a package from UPS, so I turned on my viewing software for my cameras, and notice the Boiler Room Door camera was not connected.   The camera terminates in...

AT&T is retiring copper (old Tip & Ring) phone lines due to cost of the Battery Plant in CO to handle -48 VDC power, as they deploy Fiber (albeit very slow change over). Cable companies such as Charter/Spectrum also have dedicated DOCIS Channels for T-BAND VoIP phone service.   The issue I have...

It's been so long since I set this up (18 years now), but I have been having issues with ALC going OFFLINE.   I cleared the RAM yesterday with ALC starting working again. Today it was again offline, and I recalled I had no issues on 3.12D, so I switched proms and that's when things went south...

I never ran into this before after updating my firmware last year (don't recall if I tried to set the clock either). Below are Firmware and Software revisions:     PC Access: 3.17.0.843     Omni II Controller FW 4.0b     I connect PC Access using Network, and double-click "Controller Time" and I...

Last June I updated OMNI PRO II from 3.2D to 4.0B and event errors have played havoc with reliability. I don’t know if this is related to Phone Outage issues or the fact I made a small program change yesterday to a UPB trigger timer, but last evening ALC stopped Communications with controller...

We have been a HAIKU users since 2012, and purchased Space when introduced.  HAIKU has been meeting our needs, until recently when we deployed Dahua Bullet Camera that uses RTSP protocol to access MJPEG stream.   Dahua  details of how to stream MJPG is limited, but does mandate the use of RTSP...

For the first time I set up a Port Forward to Omni Pro Controller and did a test connection. I connected and was able to status controller, but after that the omnipro II did not turn on my lights at dusk. The APP showed them on (once again using wifi internal IP), but lifts were indeed OFF. I...

iPhone 4: IOS 6.1.2   This may be due to my OmniPro II Firmware (I am researching the current release for any reported bugs) which is currently 3.2D.   I have a Flag that I keep the number of days I will be out of town, so when I arm VACATION all thermostats are set to 55 Degrees but when count...

Greetings, I Have PC ACCESS 3.5.0.583 and Firmware 3.2D in an OMNIPRO II Controller. The following notes apply: Notes: FamFirePlace = Button (Macro) FamFire-dim = ALC Dimmer Switch ALC 4-Button Scene Slitch (Button-3 is being used) I am trying to use a single button on ALC...