After all of my Insteon switches failed(wouldn't turn on by the paddle on the switch, although
the remote worked fine). I looked into trying to repair same.
I found that it was the small push switches that were defective.
I replaced them with some from Digikey #SW424CT-ND, they were exact replacements.
It helps if you are familiar with surface mount PCB's. I used a very fine tip on the
soldering iron and the job was not too difficult.
The best news is that now the Insteon switches work perfectly.
So, if you have some defective switches they can be repaired.
Cliff s
the remote worked fine). I looked into trying to repair same.
I found that it was the small push switches that were defective.
I replaced them with some from Digikey #SW424CT-ND, they were exact replacements.
It helps if you are familiar with surface mount PCB's. I used a very fine tip on the
soldering iron and the job was not too difficult.
The best news is that now the Insteon switches work perfectly.
So, if you have some defective switches they can be repaired.
Cliff s