I originally added rooms in PC Access but later removed them. Haiku still retains those rooms even after re-syncing and clearing cache several times. Anything else I should be doing to get rid of it from within Haiku?
Im having a tough time figuring out how to program a light to turn on after sunset and turn off at 11pm. I want the light to turn on 35mins after sunset (which is simple enough) but when i input the action to turn on the light i am only able to turn it on for a set number of hours/minutes. I...
Im using a Lutron Homeworks P5 lighting system that has 1 rs232 output only which feeds my OP2. The wireless shades are able to communicate to the P5 processor if I purchase a RadioRa2 wireless repeater. Problem with that is that it would have to be connected rs232 and the lutron processor...
I already have a 16 zone expander on my OP2 controller and I only have 2 zones left. Since there is no more room inside the can, I was wondering if I could get the HAI/GE wireless receiver instead of another 16 zone expander. Does the wireless receiver hook up to a spare zone and then all the...
I would like to keep my existing Hunter sprinkler system running exactly how it is by utilizing the controller located in my garage. I am mainly looking to tie in the sprinkler system to my HAI omnipro 2 so i can manually trigger the zones on and off. I don't need to program cycles, etc. from...
Looking into installing a metal gate for my backyard and want to integrate the lock mechanism into my omnipro 2. what are my options? i see the motorized locks from schlage, yale, etc. but not sure how well they will fare in canadian winters ;)
any recommendations?
Im looking to tie in some automation to the OP2 panel using my cctv dvr. The dvr has alarm inputs and outputs so I got thinking if it would be possible to trigger some commands with its alarm outputs. For example, if I setup a camera to do motion recording, is it possible to send out a command...
i have an HAI OP2 automation panel installed with an elk-930 doorbell detector and elk-960 delay timer that works perfectly with my doorbell. im using a generic plunger type doorbell and standard push button. i have automation setup in the HAI that the doorbell is a zone that is "ready" until...
i am having an issue with my omnistat 2 thermostat and my furnace and AC. basically, in order for my AC to start and function, i need to wire the blue common from the omnistat 2 to the furnace board. once i do that, it starts the AC no problem. but in the winter, having it wired this way does...
i want to program my urc mx-980 remote control (using a msc400 base station) to control certain functions available only through my OP2 controller. for example, i have a lutron homeworks lighting system that is connected rs232 into the OP2. everything works perfectly, but i want to be able to...
i want to display messages on the lcd screen every 2 weeks when its garbage day. i can't seem to figure out how. the only thing i think that may work would be making a flag, but the problem is that i have no idea what a flag is, what its used for, and how to create one. if anyone can help...
has anyone tied in a sprinkler system to their OPII? i have 6 zones that i would like to monitor/setup macros with my HAI, and my old hunter controller just went bad so i need to get something new. i would prefer to have the actual unit be setup from the controller (which is located in the...
so i finally wired up the secolarm garage overhead door sensor to my OPII. i have it set as an auxiliary zone type as i don't want it to set off any alarms. my intentions is to simply have it display on the omni console when the door is open. seems this is harder than i thought. i made a...
i just purchased a a secolarm SM-226L-3 garage door magnetic closure to be able to monitor if its open or closed.
http://www.smarthome.com/7455B/Garage-Door...-226L-3-/p.aspx
my intention is to connect this as a zone on my HAI omnipro2 controller and have it set that when the zone is "secure"...
i, and HAI tech support, are stumped with my issue. i am hoping someone here has encountered this and can offer a solution.
my rc2000 was installed months ago and worked fine powering my furnace. when i installed the AC, it would click and try to start the AC motor but appeared to not have...
i'm looking for an outdoor wireless motion sensor that i can tie into my hai omni pro 2 controller. i have searched and found only a few, but they all have like 2-5 minute auto shut-offs to save battery life. im looking to trigger some lights and can't have them standby for 5 mins. just to...
I have the omni pro 2 controller installed by a CI and he has put 1 siren in the system. I would like to add another siren indoor and an exterior one with strobe light. I know the omni only puts out 1a of power and most sirens use 0.5a so I assume I would be safe in adding 1 more interior one...
I have a lutron homeworks 4 system that is integrated via rs232 to the omni pro 2 controller running 3.4 firmware. I have everything setup and running prefectly, however I would like to setup the lights to be grouped. For example, I have programmed all the lights individually and control them...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.