Search results

I tried to find one of the VRCOP units and didn't seem to find one. My phase coupler was fried for who knows how long, bought a new one thinking that was my issue, but it still didn't work. I know what you mean about keeping the OMNI, I love the unit and don't want to ever have to get rid of...

You are never going to believe this, IT'S FINALLY WORKING AGAIN!!! It was the ProLink setup. I tried it no less than 3 times during all my testing and it never seemed to work and I thought I was just being silly trying the same thing over and over. I suspect I may have had another link in...

At the time that PCA was connected via serial, I did not happen to test the X10. I had pretty much given up on it and was focusing on using the serial for a link to HomeSeer using the remotes. I was sending commands using the Send Command function from PCA to see if I could receive anything on...

I tried most all of them. Same result. Warm booted, and then even wiped the EEPROM and RAM and reloaded the saved file. I'm out of ideas.

The MSC-400 communicates with a terminal emulator on the laptop just fine. I then used the same laptop and connected directly to the panel and can see the small status LEDs light up as I send serial data. But still no response. I then created a button to Send data out the serial port to test...

I have Universal MX-3000 remotes all over the house that using a MSC-400 send serial commands to the OMNI. The system worked great for years until X10 just completely quit altogether. I never tried to use the remotes to control anything for years since the X10 was so problematic. Now I want...

I tried adjusting that value, didn't seem to help one way or another. Now I have Homeseer adjusting it every day at 12:00.

Found the HomeSeer sync. I'm new to this software and it's quite different than what I'm used to. Thanks!

I must be an idiot. I have the dealer software, downloaded it again tonight from your link. Still seems to be be the same version as I have 3.17.3.861 and I don't see anything about a clock sync. File 6.6.0.7609

Maybe he can help with the time clock question I just posted. I'll give that link a try. Thanks!

I don't suppose anyone has any good way of syncing the clock on the HAI OMNI? My clock is off minutes a week. Drives me nuts having to correct the time all of the time. I've played with the adjustment, but it doesn't seem to help, maybe I just need to play with it some more. I'm a bit...

I found HomeSeer with a OMNI plugin that should be able to take over the lighting and other controls while still using the HAI for it's own automation. This should help somewhat "future proof" the system, at least for a little while.

I just can't seem to get my X-10 to work anymore. Tried new serial modules, phase coupler/repeaters, nothing it getting through anymore. I'm looking in to Z-Wave, but is the Leviton VRC0P anywhere to be found? I'm dead without it. I want to use the Omni IIe to be the controller. Is this...

I just happened to notice mine was dead completely. There are two protection diodes and a 5V regulator that are cooked and dead shorted. I was afraid to spend the money and time replacing those parts only to find out the rest is bad because of their failure. So I bought a used one that does...

I may try the UPB if others can say that it works much better than X10.   I was just leary of another powerline communication knowing I have some noise issues especially with the VFD (Variable Frequency Drive) unit for my well pump.  This thing convert 120VAC into a variable frequency 3-phase...

Searches for the VRC0P aren't yielding much.   Kind of what I was afraid of.   My X10 has pretty much completely failed and finding good replacements are hard to come by.  I purchased a new/used X10 interface, but it didn't help at all and only seemed to make it worse.  Not sure if it's other...

I have a handfull of X-10 devices that basically all have stopped responding or rarely if at all.  It's time to move to something much more reliable.  What can I go to that I can still find items and interfaces for?   ZigBee interfaces are not available.  What are you all using and are the...

I just checked for new updates and it responded with no updates found.  Seems like it's up and working.

Do an update and it should take care of it.  It's been fixed for a month or two now.   My version is 3.17.3.861   If you are 3.13, you are way behind.

What Snaplink issues?   I've been running it for years and don't remember any issues.   Although I don't update my iOS (version 11.x) and I don't use a lot of add-ons.