I am also a Omnipro user for over 22 years.
Still running strong with Home-Assistant and OmniLinkBridge to get all the Omnipro data to HA.
Give it a try.
PS I know the clock is ticking but HA and OLB should give me more years with this Omnipro-II system which I love.
It is so disappointing how the NQLink app has been handled. I purchased every version available just to support this person.
No good deed goes unpunished.
So glad I have Home Assistant and OmniLinkBridge to replace this broken app.
So disappointing.
I use a HAI Temp/Humidity sensor and this code to control my whole house humidifier.
The logic used in the Low/Hi settings for humidity are for a dehumidifier.
This works for me.
I know this is an old thread but thought someone my also have the question.
573. // WHOLE HOUSE HUMIDIFIER ***...
Well have Hass-io up with OmniLinkBridge. Nice to see all the OmniPro entities back on the screen. Really want to thank you RSW686 for all your work on this addon. It makes Home-Assistant a much more useful tool for me with the OmniPro connected.
Also, thanks Pete C for you suggestion of using...
Thank you Pete_c. As a Kodi user I have an S912 but will wait for a bit to try HA on it. Just trying a new (1st) install of hass-io.
Have it up and running with MQTT and it is picking up my tasmota devices. Will try OMB install next.
Thanks again and will look to purchasing another S912 for a...
Thank you for the quick reply.
I forgot to mention I installed Hassbian as I didn’t know there was a HASS-IO install for OLB.
I know hassbian is being deprecated now.
Will this package run in Hassbian on Docker. If not, I guess I start over.
Could someone help me get OLB going? I had HA/Mosquitto/OLB running on a RPI-3B for over a years but lost it (SD fail). This was the third fail but this time the image I had did not write correctly. Anyway I am trying to get everything going again on an RPI-4B 4GB board.
I have HA/Portainer...
Getting OmniLinkBridge install and working has rekindled by interest in Home-Assistant. Thank you rsw686 for your work.
I have HA 0.91.1 installed and am wondering if you can help with an issue I have with z-wave locks reporting.
OLB does not report the z-wave locks to HA.
OLB logs for a lock...
2019-02-24 21:22:24 WARNING (MainThread) [homeassistant.helpers.config_validation] Your configuration contains extra keys that the platform does not support.,Please remove [temperature_low_state_topic], [temperature_low_command_topic], [temperature_high_state_topic]...
Many comments here relate to installing OmniLinkBridge on a windows machine. Can I install it on a separate RPI 3B+ system?
I assume with Mono and Docker in first.
Hi All,
I have been reading the mail here and really would like to get started with OmniPro-II integration into Home Assistant.
I have had an OmniPro for over 20 years. On third board now (OmniPro-II ver. 4.0B). Have Dealer PC access 3.
I am currently running Home Assistant on a RPI 3B. I am...
Well solved the problem by removing the zipato and replacing with a Vision ZL7431US single Z-Wave relay.
The main issue seemed to be that the motion detector I am using is a DLX WHT Motion Sensor from Amazon and it uses semiconductor outputs not relay output to turn on the lights (in this case...
Yes thanks. Have switch wired correctly. (I was an electronic tech for 15 years and wired my home when built)
I really believe this is a program/ setup issue. I have opened a ticket with zipato but no response yet. I did read that there are different switch modes for this device but have no idea...
First, thanks for the quick reply.
Yes. I have that diagram and this is how I connected it except that I have both S1 and S2 connected together and driven by the Motion Detector output. I drive each floodlight (LED) bulb separately (NO1 - NO2). I have measured to make sure I have correct input...
Hi all,
I searched the forum but did not find a similar topic so will ask the question here.
I have been trying to Z-Wave automate an outside floodlight to duplicate the X-10 functionality of the Floodlight they sold years ago. I have 11 of these around my home and only 2 are still working so...
I had the same failure about two years. I had to send it back to HAI twice as it was an intermittent failure.
Worked for 6 weeks after they returned it as "could not duplicate".
On the second try it was "CND" again. As an ET for years I knew what the issue was, I asked them to change the...
Version 1.05 currently.
Security Access (Door Lock) issues.
1. 4 digit limit on user access code to lock or unlock the Z-Wave lock. Yale YRD-220-ZW allows 4-8 digits.
If I set a 4 digit code in the lock, it works with SPACE. Should be able to have more digits for better security..
2. To...
What??
Maybe I did not explain my issue properly..
I have the lock installed, programmed into OmniPro II and I have an icon (FRONT DOOR LOCK) on the front page of Haiku on my iPhone under Access Controls.
It shows LOCKED or UNLOCKED depending on its state. If I touch it, (goes to next next...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.