Search results

Hi All,   Used a good number of the SWB28 housings but never had cause to measure accurately until this project the internal depth of the housing.    Not using the housing this time with a M1. Look to mount a 12 pole sub board up top fit some ELV segregation and mount a couple of LED power...

Hi Folks, Anyone had any success pushing Philips Hue lighting commands from the M1 XEP? Cheers......

Hi Guys,   Spinning my wheels on this one.   I have an up to date 2.0.42 firmware XEP which will not send emails. I have setup google to permit "less secure apps". Setup a dedicated gmail account specifically just to send the emails from the XEP to alleviate and security concerns and verified...

I installed a M1 in remote location about 3800km from where I am currently living about 7 years ago. It has up until a day or so ago worked flawlessly where I was contacted by the owners who are friends to tell me that all of a sudden in the early hours of the morning there was a loud cracking...

I installed a M1 in remote location about 3800km from where I am currently living about 7 years ago. It has up until a day or so ago worked flawlessly where I was contacted by the owners who are friends to tell me that all of a sudden in the early hours of the morning there was a loud cracking...

Can not seem to find and voice messages that will tell you which zone or zones cause the alarm to go off. is there a way to facilitate this or is there a message that does it and I missed it?   Cheers,   Fleetz

Got a real head scratcher!   Configuring another M1 for a job at the moment and engineering what I can ahead of installation. Built up a simple telephone line, Mode 3 (RJ31X) and line out module and started testing the system, everything seems fine.....except.   Now here is the kicker. I have...

Doing some planning. Have a door that will have a reed switch and also will have a door strike. Have to use the M1KAM access module. Wondering if I can use the one reed switch which would be wired in parallel going to a zone input on the M1 and also the door open sense input on the KAM? I...

Just wondering if our friends at ELK/Ness are following the iRule product progress? Many other HA companies have supported integration of their products in modules that enable control and monitoring of their HA products. From what I can see from popularity of both products I see a good fit if...

Currently planning out a new build for daughter and SIL. Looking at installing a 24 port gig unmanaged switch into a ELK 28" housing and with what else is going the housing it is quite tight so the only way would be to cable and connect directly to the switch via RJ45 connectors. I typically...

Wondering what 4 core cable you guys typically use for PIR installs. 7x 0.20 or 14 x 0.20. I realise the difference and typically use 14 x 0.20 as it is a no brainer as you do not need to think about cable lengths. Nearly all installs the max run is 25 metre (75 foot) more typically most are...

Hi Folks, Wondering what you guys are using for managing LV cabling inside a roof space? I have used catenary systems before screwing sturdy eyelets into roof timbers and tensioning stranded galv wire. I heard about some other systems again using the roof timbers but screwing in what was...

Hi Jason,   I finished up giving up waiting for the Russound interface on eKeypad, had to go for another way of integrating the Russound system with the M1 system. That be be honest it was very disappointing as you may recall I was very patient....a number of "when is it going to be ready" posts...

Hi Jayson, Have not used your product in at least a couple of years maybe 3?...bought it for Russound which is "coming soon" gotta say really I am disappointed. Have deleted the app off my iPhone years ago. Truth in advertising? Fleetz

Can anyone confirm the surface mount pull-up resistors numbers on the main M1 board. I am only after Zn1, Zn2 and Zn3. I need to remove them for an analog zone application. Appreciate if some has this info. Thanks, Fleetz

Hi Folks, Anyone got any suggestions on a portable ~ 7" to 10" touch screen pad that has its own charging dock station. It would be neat if the same unit had a wall mount option as I have two applications one for a kitchen bench and the other for a general living area wall (I can get power to...

Have a drive way sensor which picks up cars or people approaching a remote located house. The owners want to know when someone approaches. When the sensor is secured then M1 says "driveway". The are times when people might congregate out by where the sensor and every few seconds with the moment...

Using ntp2.tpg.com.au as the NTP time server site on a friends M1 system. They had an alarm event and ask me what was the issue was, on checking the log the date is out exactly 2 days. That wasn't the alarm event problem of course, sorted that out and in doing so noticed the date discrepency...

I have set up a custom timer to allow a light turn off time to be adjusted after it turns on after dark. The problem is it turns on but won't turn off. Here is what I have done Created a custom time of day called "OS LTS on to" selected timer from the drop down menu and then set 10:30pm. I the...

With the M1 is it valid to be able to have a series of rules sharing the same trigger where each rule have conditional "AND" conditions that can never conflict. for example same zone but the AND condition is days during the week or weekend or a light status. When ZN 17 becomes not secure how...